Retro Replay Contact Problems: Difference between revisions
From ReplayResources
Jump to navigationJump to search
Count Zero (talk | contribs) (Created page with ''''Contact problems''' are the one major reason for strange behavior observed with the Retro Replay. Before even suspecting anything else ensure to have proper contact. :) **…') |
Count Zero (talk | contribs) mNo edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
'''Contact problems''' are the one major reason for strange behavior observed with the [[Retro Replay]]. Before even suspecting anything else ensure to have proper contact. :) | '''Contact problems''' are the one major reason for strange behavior observed with the [[Retro Replay]]. Before even suspecting anything else ensure to have proper contact. :) | ||
==The Problem== | |||
* | * The ''Retro Replay'' itself has gold plated contacts, many if not most c64s however have tin, brass or other cheap metal contacts at the expansion port. This results in increased oxidation at the contacts (an effect well known in [http://www.chem1.com/acad/webtext/elchem/ ''electrochemistry'']). | ||
* Additionally the cartridge board is 0,2mm thinner than it should be | |||
* | |||
==Fixing== | |||
* Clean the contacts of both the cartridge and the expansion port. You may use a rubber or sand paper for that. | |||
* Bend the contacts of the expansion port so the cartridge fits more tightly. | |||
Ultimately: | |||
* Put some solder onto the contacts of the Retro Replay itself, which makes them thicker and also "softer" - resulting in better contact. (You may think about filing off some of the gold from the contacts - and possibly sell it.) | |||
==Weblinks== | |||
* [http://www.kaminek.at/blog/2010/03/vergoldete-steckkontakte-kurios-oder-famos/ Article "Vergoldete Steckkontakte"] unfortunately german only | |||
[[Category:Retro_Replay_Hardware]] | [[Category:Retro_Replay_Hardware]] | ||
Latest revision as of 20:40, 6 June 2010
Contact problems are the one major reason for strange behavior observed with the Retro Replay. Before even suspecting anything else ensure to have proper contact. :)
The Problem
- The Retro Replay itself has gold plated contacts, many if not most c64s however have tin, brass or other cheap metal contacts at the expansion port. This results in increased oxidation at the contacts (an effect well known in electrochemistry).
- Additionally the cartridge board is 0,2mm thinner than it should be
Fixing
- Clean the contacts of both the cartridge and the expansion port. You may use a rubber or sand paper for that.
- Bend the contacts of the expansion port so the cartridge fits more tightly.
Ultimately:
- Put some solder onto the contacts of the Retro Replay itself, which makes them thicker and also "softer" - resulting in better contact. (You may think about filing off some of the gold from the contacts - and possibly sell it.)
Weblinks
- Article "Vergoldete Steckkontakte" unfortunately german only
